Chain Motors & Control Triangular TrussBox TrussGround Support SystemCurtain Track SystemsPrice List
SpeedGid SystemsTruss Deck & Catwalk SystemsTruss Access TowerSpecialty Tracking & Lifting Equipment
15823 South Main Street spacerLos Angeles, CA 90248   2845 Coleman Street, Building 1AspacerNorth Las Vegas, NV 89032
Tel: 310.538.4175 spacerFax: 310.538.4180   Tel: 702.270.4240 spacerFax: 702.270.4221
Chain Motor and Control
300Ibs. CM Pro Star
1/2 Ton CM Pro Star
1 Ton CM Pro Star
6 Way motor Control
12 Way Motor Control
24 Way Motor Control

At ShowRig we use only CM chain motors.Prolonged existence as the industry standard for their reliability and safety record. All of our motors are carefully inspected and maintained by factory-trained technicians.
•ShowRig has one of the largest inventories of chain motors in the industry
•Our motors have been carefully modified with strain relief and handles to make them as "user friendly" as possible.

High Speed and a limited quantity of 110v motors are available

Motor Rentals Include:
•Power Distribution
•Motor Control System
•Rigging Hardware

300 lbs. CM Pro Star

•w/ 40'ft of chain, unit weight 39 lbs.


1/2 Ton CM Load Star

•w/ 40' ft of chain, unit weight 79 lbs.
•w/ 60' ft of chain, unit weight 91 lbs.
•Shipping weight 4 motors w/ crate 495 lbs.


back to top
1 Ton CM Load Star

•w/ 60'ft of chain, unit weight 147 lbs.
•shipping weight 2 motors w/ case, 421 lbs.
•w/ 100' ft of chain, unit weight 187 lbs.


back to top
6 Way Motor Control

Front View



6 Way Hand Held Remote


This Power Distribution and Control Unit (PD) can control from 1 to 6 motors. Each motor circuit can be controlled separately. Due to the unique light weight and compact design these PDs can be mounted on the truss to shorten motor control cable runs or easily hauled up to the perms.

•A 10/5 power cable comes with each PD. The power input connection is on the back panel. There is also a power output allowing the use of "jumper" cables to feed other PDs, eliminating the need for multiple tie-ins. For the power tie-in, ShowRig can provide any of the industry standard connections.

•To avoid frustrating phase problems, all of our PDs have phase reversal switches to insure proper motor control direction.



Power Requirements:
208v/3 phase/ 5 wire
For use with 1/2 ton motors 30 amps
For use with 1 ton motors 60 amps
back to top
12 Way Motor Control

Front View



Rear View



12 Way Hand Held Remote Pendant

This Power Distribution and Control Unit (PD) can control from 1 to 12 motors. Each motor circuit can be controlled separately. Due to the unique light weight and compact design these PDs can be mounted on the truss to shorten motor control cable runs or easily hauled up to the perms.

A 10/5 power cable comes with each PD. The power input connection is on the back panel. There is also a power output allowing the use of "jumper" cables to feed other PDs, eliminating the need for multiple tie-ins. For the power tie-in, ShowRig can provide any of the industry standard connections.

To avoid frustrating phase problems, all of our PDs have phase reversal switches to insure proper motor control direction.


Power Requirements:
•208v/3 phase/ 5 wire
•For use with 1/2 ton motors 30 amps
•For use with 1 ton motors 60 amps
back to top
24 Way Motor Control
Front View




Rear View




Remote Control unit


This Power Distribution and Control Unit (PD) can control from 1 to 24 motors. Each motor circuit can be controlled separately. Due to the unique light weight and compact design these PDs can be mounted on the truss to shorten motor control cable runs or easily hauled up to the perms.

•All 24 channels can be controlled by the 24 way remote unite or split onto separate 6 way hand held controllers.

•A power cable comes with each PD. For the power tie-in, ShowRig can provide any of the industry standard connections.

•To avoid frustrating phase problems, all of our PDs have phase reversal switches to insure proper motor control direction.

Power Requirements:
•100 amps 208v/3 phase/ 5 wire
back to top

15823 South Main Street Los Angeles, CA 90248 6585 Escondido St., Suite GLas Vegas, NV 89119
Tel: 310.538.4175 Tel: 310.538.4180 Tel: 702.270.4240 Tel: 702.270.4221